NewsletterLIÊN KẾT WEBSITE
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1600 / 1333 / 1066 MHz FSB
2. Up to 64GB DDR2 800 / 667 / 533 SDRAM Fully Buffered DIMM (FB-DIMM)
3. 1 Universal I/O (UIO) Slot, 3 (x8) Full-height/length PCI-E, 2 (x8) Low-Profile PCI-E Slots
4. Intel® 82575EB Dual-port Gigabit Ethernet Controller
5. 8 x 3.5" Hot-swap Drives Trays; 6x SATA Hard Drives Supported
6. 700W High-efficiency Redundant Power Supply
 |
Integrated Board
|
|
Product SKUs |
|
|
SYS-6025W-URB |
SuperServer 6025W-URB (Black) |
|
Motherboard |
|
|
Processor/Cache |
|
|
Dual 771-pin LGA Sockets |
|
|
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: |
|
|
Quad-Core Intel® Xeon® Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz |
|
|
Dual-Core Intel® Xeon® Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
|
|
System Bus |
1600 / 1333 / 1066 MHz system bus |
|
System Memory |
|
|
Memory Capacity |
Eight 240-pin DIMM sockets |
|
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory |
|
|
Dual branch memory bus |
|
|
Memory must be populated in pairs |
|
|
Memory Sparing supported |
|
|
Memory Type |
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
DIMM Sizes |
256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
|
Memory Voltage |
1.8 V or 1.5 V |
|
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
|
|
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
|
On-Board Devices |
|
|
Chipset |
Intel® 5400 (Seaburg) chipset |
|
MCH + ESB2 |
|
|
SATA |
Intel ESB2 SATA 3.0Gbps Controller |
|
RAID 0, 1, 5, 10 support (Windows only) |
|
|
RAID 0, 1, 10 support (Linux) |
|
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 / 1.5 |
|
200-pin IPMI slot (SIMSO(+)) |
|
|
For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) |
|
|
Network Controllers |
Intel® 82575EB Dual-Port Gigabit Ethernet Controller |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
Intel® I/OAT support for fast, scaleable, and reliable networking |
|
|
Graphics |
ATI ES1000 controller with 32 MB of video memory |
|
Super I/O |
Winbond 83627HF chip |
|
Clock Generator |
ICS 401 chip |
|
Input / Output |
|
|
Serial ATA |
Six Serial ATA ports |
|
Six SATA hard drives supported |
|
|
IDE |
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card |
|
Compact Flash (40-pin connector, IDE 1, single channel) slot |
|
|
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
Floppy |
1 Floppy controller; 1.44 MB |
|
LAN |
2x RJ45 LAN ports |
|
USB |
2x USB rear ports |
|
3x USB internal headers |
|
|
Total 5 USB 2.0 Compliant / 1.1 Compliant |
|
|
VGA |
1x VGA Port |
|
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
Serial Port / Header |
1 Fast UART 16550 serial port |
|
1 Fast UART 16550 serial header |
|
|
System BIOS |
|
|
BIOS Type |
16Mb Flash EEPROM with Phoenix® BIOS |
|
BIOS Features |
Plug and Play (PnP) |
|
DMI 2.3 |
|
|
PCI 2.2 |
|
|
ACPI 1.0 / 2.0 |
|
|
USB Keyboard support |
|
|
SMBIOS 2.3 |
|
|
Chassis |
|
|
Form Factor |
2U Rackmount |
|
Model |
|
|
Dimensions |
|
|
Height |
3.5" (89mm) |
|
Width |
17.2" (437mm) |
|
Depth |
25.5" (648mm) |
|
Gross Weight |
55 lbs (24.9kg) |
|
Available Colors |
Silver, Black |
|
Front Panel |
|
|
Buttons |
• Power On/Off button |
|
• System Reset button |
|
|
LEDs |
• Power LED |
|
• Hard drive activity LED |
|
|
• 2x Network activity LEDs |
|
|
• System Overheat / Fan Fail LED |
|
|
• Power fail LED |
|
|
Ports |
2x USB Ports + DB9 COM Port (optional) |
|
Expansion Slots |
|
|
Left Side |
1 Universal I/O (UIO) Slot |
|
3 (x8) PCI-E Slots (Full-height / Full-length) |
|
|
Right Side |
2 (x8) PCI-E Slots (Low-Profile) |
|
Drive Bays |
|
|
Hot-swap |
8x 3.5"SATA Hot-swap drive trays |
|
Supports up to 6x SATA hard drives |
|
|
Peripheral Drives |
|
|
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
|
Floppy |
Slim 1.44MB Floppy Drive (Optional) |
|
SATA Backplane |
|
|
1x 2U SATA backplane |
|
|
System Cooling |
|
|
Fans |
3x 80mm 6300 RPM fans |
|
Shroud |
1x Air Shroud |
|
Power Supply |
|
|
700W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
|
|
AC Voltage |
100 - 240V, 60-50Hz, 10 - 4 Amp |
|
+5V standby |
4 Amp |
|
+12V |
57 Amp |
|
+5V |
30 Amp |
|
+3.3V |
24 Amp |
|
-12V |
0.6 Amp |
|
PC Health Monitoring |
|
|
CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
|
6 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
|
|
FAN |
Total of eight 4-pin fan headers supporting up to 8 fans |
|
8x fans with tachometer status monitoring |
|
|
Status monitor for speed control |
|
|
Support 3-pin fans (w/o speed control) |
|
|
Pulse Width Modulated (PWM) fan connectors |
|
|
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
|
Thermal Control for 8x fan connectors |
|
|
PC temperture sensing logic |
|
|
Thermal Monitor 2 (TM2) support |
|
|
PECI |
|
|
LED |
CPU / System Overheat LED |
|
UID / Remote UID |
|
|
Other Features |
Chassis intrusion detection |
|
Chassis intrusion header |
|
|
SDDC Support |
|
|
Operating Environment / Compliance |
|
|
RoHS |
|
|
Environmental Spec. |
Operating Temperature: 10° to 35°C (50° to 95°F) |
|
Non-operating Temperature: -40° to 70°C (-40° to 158°F) |
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
|
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Copyright © 2011 Bản quyền thuộc về Công ty TNHH Tin học Viễn thông Nhất Tiến Chung. Powered by BizMaC
Giỏ hàng
