NewsletterLIÊN KẾT WEBSITE
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1333 / 1066 MHz FSB
2. Intel® 5100 (San Clemente) Chipset
3. Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM
4. Intel® Dual 82573V/L Gigabit Ethernet Controller
5. 6x SATA2 (3 Gbps) Ports via ICH9R SB Controller
6. 1 (x16) PCI-e, 1 (x4) PCI-e (using x16 slot), 2x PCI-X 133/100MHz, 2x PCI 33MHz slots
7. High Definition 7.1 Channel Audio
8. Low Profile IPMI 2.0 (SIMLP) Slot
|
Product SKUs |
|
|
MBD-X7DCA-i-O |
X7DCA-i(Standard Retail Pack) |
|
MBD-X7DCA-i-B |
X7DCA-i(Bulk Pack) |
|
Physical Stats |
|
|
Form Factor |
Extended ATX |
|
Dimensions |
13.05" x 12.075 " (33.15cm x 30.67cm) |
|
Processor/Cache |
|
|
CPU |
Dual 771-pin LGA Sockets |
|
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: |
|
|
Quad-Core Intel® Xeon® Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz |
|
|
Dual-Core Intel® Xeon® Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
|
|
System Bus |
1333 / 1066 MHz system bus |
|
Operating System Software |
Supports 64-bit Operating Systems |
|
Supports 32-bit Operating Systems |
|
|
System Memory |
|
|
Memory Capacity |
Six 240-pin DIMM sockets |
|
Supports up to 48GB 667/533MHz DDR2 ECC Register memory |
|
|
Memory must be populated in pairs |
|
|
Memory Type |
667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
DIMM Sizes |
512MB, 1GB, 2GB, 4GB, 8GB** |
|
Memory Voltage |
1.8V only |
|
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
|
|
On-Board Devices |
|
|
Chipset |
Intel® 5100 (San Clemente) chipset |
|
Intel® ICH9R + PXH-V |
|
|
SATA |
Intel ICH9R SB SATAII Controller |
|
RAID 0, 1, 5, 10 support (Windows only) |
|
|
RAID 0, 1, 10 support (Linux) |
|
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
200-pin IPMI slot (SIMLP) |
|
|
NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
|
|
Network Controllers |
Intel® Dual 82573V/L Gigabit Ethernet Controller |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
Audio |
High Definition 7.1 Channel Audio |
|
Super I/O |
Winbond W83627HG-AW chip |
|
Clock Generator |
CK505 chip |
|
Input / Output |
|
|
Serial ATA |
Six Serial ATA ports |
|
Six SATA hard drives supported |
|
|
IDE |
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card |
|
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
Floppy |
1 Floppy controller; 1.44 MB |
|
LAN |
2x RJ45 LAN ports |
|
USB |
4x USB rear ports |
|
6x USB internal header |
|
|
10 total USB ports, 2.0 Compliant |
|
|
Audio |
High Definition 7.1 Channel Audio |
|
Line-in / Line-out / Microphone Ports |
|
|
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
Serial Port / Header |
1 Fast UART 16550 serial port |
|
1 Header |
|
|
Parallel Port |
1x ECP / EEP Parallel Port |
|
Expansion Slots |
|
|
PCI-Express |
1 (x16) PCI-e slot |
|
1 (x4) PCI-e (using x16) slot |
|
|
PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots |
|
PCI |
2x 32-bit 33MHz PCI (5V) slots |
|
System BIOS |
|
|
BIOS Type |
8Mb Flash EEPROM with Phoenix ® BIOS |
|
BIOS Features |
Plug and Play (PnP) |
|
DMI 2.3 |
|
|
PCI 2.2 |
|
|
ACPI 1.0/2.0 |
|
|
USB Keyboard support |
|
|
Hardware BIOS Virus protection |
|
|
Management |
|
|
Software |
Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 |
|
Watch Dog |
|
|
NMI |
|
|
Power Configurations |
ACPI / ACPM Power Management |
|
Main Switch Override Mechansim |
|
|
Wake-On-Ring (WOR) header |
|
|
Wake-On-LAN (WOL) header |
|
|
Keyboard Wakeup from Soft-Off |
|
|
CPU Fan auto-off in sleep mode |
|
|
Power-on mode for AC power recovery |
|
|
Internal/External modem remote ring-on |
|
|
Suspend to RAM (STR) |
|
|
PC Health Monitoring |
|
|
CPU |
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset |
|
CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
|
|
FAN |
Eight 4-pin fans |
|
8x fans with tachometer monitoring |
|
|
Status monitor for speed control |
|
|
Status monitor for on/off control |
|
|
Support for 3-pins |
|
|
Low noise fan speed control |
|
|
Pulse Width Modulated (PWM) fan connectors |
|
|
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
|
Thermal Control for 8x Fan Connectors |
|
|
PSU I2C temperature sensing logic |
|
|
Thermal Monitor 2 (TM2) support |
|
|
PECI |
|
|
LED |
CPU / System Overheat LED |
|
Suspend-state Indicator LED |
|
|
+5V Standby alert LED |
|
|
Other Features |
Chassis Intrusion Detection |
|
Chassis Intrusion Header |
|
|
SDDC Support |
|
|
Operating Environment / Compliance |
|
|
RoHS |
|
|
Environmental Spec. |
Operating Temperature: 10° to 35°C (50° to 95°F) |
|
Non-operating Temperature: -40° to 70°C (-40° to 158°F) |
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
|
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
