NewsletterLIÊN KẾT WEBSITE
Key Features
1. Intel® Xeon® 3000 Series, Core™2 Duo, Pentium® D, Pentium 4 & Celeron D in LGA775 Package (FSB 1066/800/533)
2. Intel® 946GZ Chipset
3. Up to 4GB dual channel unbuffered, non-ECC DDR2 667/533 SDRAM
4. 2x Intel® 82573 PCI-e Gigabit LAN Port
5. Built-in SATA2 Controller 4x SATA (3Gbps) Drive Support
6. 1 Universal Slot Supporting:
1 (x4) (x8 physical) PCI-Express OR
1x 32-bit 33MHz PCI slot,
1x 32-bit 33MHz PCI
7. On Chip Intel 946GZ Video
8. 2 rear USB ports + 2 USB headers
|
Product SKUs |
|
|
MBD-PDSBM-LN2-O |
PDSBM-LN2 (Standard Retail Pack) |
|
MBD-PDSBM-LN2-B |
PDSBM-LN2 (Bulk Pack) |
|
Physical Stats |
|
|
Form Factor |
uATX |
|
Dimensions |
9.6" x 9.6 ", (24.4cm x 24.4cm) |
|
Processor/Cache |
|
|
CPU |
Single LGA775 ZIF Socket |
|
Supports a Dual-Core Intel® Xeon® 3000 Series |
|
|
Supports an Intel® Core™2 Duo E6000 and E4000 Series |
|
|
Supports an Intel® Pentium® E2000 Series |
|
|
Supports an Intel® Pentium® D 945, 935, 925, 915 and 820, 805 |
|
|
Supports an Intel® Pentium® 4 600 and 500 Series |
|
|
Supports an Intel® Celeron® E1000 Series |
|
|
Supports an Intel® Celeron® 400 Series |
|
|
Supports an Intel® Celeron® D 300 Series |
|
|
NOTE: This board DOES NOT support Q9000, E8000, E7000 or E5000 series processor |
|
|
System Bus |
1066 / 800 / 667 MHz system bus |
|
System Memory |
|
|
Memory Capacity |
Two 240-pin DIMM sockets |
|
Supports up to 4 GB of unbuffered, non-ECC DDR2 667/533MHz memory (Single / Dual Channel) |
|
|
Memory Type |
DDR2 667/533MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
|
DIMM Sizes |
256 MB, 512 MB, 1 GB, 2 GB |
|
Memory Voltage |
1.8V only |
|
On-Board Devices |
|
|
Chipset |
Intel 946GZ |
|
ICH7R + Intel® 82573 |
|
|
Serial ATA |
Intel® ICH7R SATA2 (3 Gbps) controller built-in |
|
Intel: RAID 0, 1, 5, 10 support (Windows Only) |
|
|
Network Controllers |
2 x Intel® 82573 Gigabit PCI-Express Ethernet |
|
Supports 10BASE-T, 100/1000BASE-TX, RJ45 output |
|
|
Graphics |
On Chip Intel 946GZ video |
|
Super I/O |
Winbond 83627DHG chip |
|
Clock Generator |
ICS9LPRS511 |
|
Input / Output |
|
|
Serial ATA |
Four Serial ATA ports ( 3Gbps ) |
|
Four SATA hard drives supported |
|
|
IDE |
One EIDE channel supports up to two UDMA IDE devices |
|
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
|
Floppy |
1 Floppy controller; 1.44 MB |
|
LAN |
2x RJ45 LAN port |
|
USB |
4x USB 2.0 / 1.1 compatible |
|
2 in front (FUCI), 2 in rear |
|
|
VGA |
Intel 946GZ on chip |
|
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
|
Serial Ports |
1x Fast UART 16550 serial port |
|
1x Serial Header |
|
|
Expansion Slots |
|
|
Universal Slot |
1 (x4) (x8 physical) PCI-Express Slot OR |
|
1x 32-bit 33MHz PCI Slot |
|
|
PCI |
1x 32-bit 33MHz PCI (5V) slots |
|
System BIOS |
|
|
BIOS Type |
8Mb Flash EEPROM with PhoenixBIOS® |
|
BIOS Features |
Plug and Play (PnP) |
|
APM 1.2 |
|
|
DMI 2.3 |
|
|
PCI 2.2 |
|
|
ACPI 1.0 / 2.0 |
|
|
USB Keyboard support |
|
|
Hardware BIOS Virus protection |
|
|
SMBIOS 2.3 |
|
|
Management |
|
|
Software |
|
|
Watch Dog |
|
|
NMI |
|
|
Power Configurations |
ACPI/APM Power Management |
|
Main Switch Override Mechanism |
|
|
Wake-On-Ring (WOR) header |
|
|
Wake-On-LAN (WOL) header |
|
|
Suspend to RAM (STR) |
|
|
Power-on mode control for AC power recovery |
|
|
Internal / External modem remote ring-on |
|
|
PC Health Monitoring |
|
|
CPU |
Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset |
|
CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V |
|
|
FAN |
Total of five 4-pin fan headers |
|
5 x fans with tachometer monitoring |
|
|
Status monitor for speed control |
|
|
Status monitor for on / off control |
|
|
Support 3-pin PWM fans (with speed control) |
|
|
Low noise fan speed control |
|
|
Pulse Width Modulated (PWM) fan conn. |
|
|
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
|
Thermal Control for 8x Fan Connectors |
|
|
I2C temperature sensing logic |
|
|
Thermal Monitor 2 (TM2) Support |
|
|
PECI |
|
|
LED |
CPU / System Overheat LED |
|
Suspend-state indicator LED |
|
|
+5V standby alert LED |
|
|
Other Features |
Chassis intrusion Detection |
|
Chassis intrusion Header |
|
|
SDDC Support |
|
|
Operating Environment / Compliance |
|
|
RoHS |
|
|
Environmental Spec. |
Operating Temperature: 10°to 35°C (50°to 95°F) |
|
Non-operating Temperature: -40°to 70°C (-40°to 158°F) |
|
|
Operating Relative Humidity: 8% to 90% (non-condensing) |
|
|
Non-operating Relative Humidity: 5 to 95% (non-condensing) |
|
|
Regulatory |
|
|
FCC |
Passed to meet FCC standard requirement |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
