NewsletterLIÊN KẾT WEBSITE
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following:
1. Dual Intel® 5500 series Xeon® Quad/ Dual-Core, with QPI up to 6.4 GT/s
2. Up to 48GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM
3. 1 (x16) PCI-E ( Low Profile)
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Intel® 82576 Dual-Port Gigabit Ethernet Controller
6. 2x Hot-swap SATA Drive Bays
7. 1200W Gold-level High-efficiency Power Supply
 |
Integrated Boards  Super X8DTT-F |
Available Colors: Black 
Drivers & Utilities BIOS Tested Memory List Manuals
|
Product SKUs |
|
|
SYS-6016TT-TF |
SuperServer 6016TT-TF (Black) |
|
Motherboards |
|
|
Processor/Cache |
|
|
CPU |
Dual 1366-pin LGA Sockets |
|
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: |
|
|
Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) |
|
|
NOTE: Support processors with Max TDP < 100W |
|
|
QPI |
up to 6.4 GT/s |
|
System Memory |
|
|
Memory Capacity |
12x 240-pin DIMM sockets |
|
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory |
|
|
Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory |
|
|
Memory Mirroring supported |
|
|
Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
|
DIMM Sizes |
1GB, 2GB, 4GB |
|
Memory Voltage |
1.5 V |
|
Error Detection |
Corrects single-bit errors |
|
Detects double-bit errors (using ECC memory) |
|
|
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
|
|
On-Board Devices (per Node) |
|
|
Chipset |
Intel® 5500 (Tylersburg) chipset |
|
ICH10R + IOH-36D |
|
|
SATA |
Intel ICH10R SATA 3.0Gbps Controller |
|
RAID 0, 1, 5, 10 support |
|
|
IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
|
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
|
|
Winbond® WPCM450 BMC |
|
|
Network Controllers |
Intel® 82576 Dual-Port Gigabit Ethernet Controller |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
|
Intel® I/OAT 3 support for fast, scaleable, and reliable networking |
|
|
VMDq support for better performance of virtualization |
|
|
1x Realtek RTL8201N PHY (dedicated IPMI) |
|
|
Graphics |
Matrox G200eW 16 MB DDR2 |
|
Super I/O |
Winbond W83527HG chip |
|
Clock Generator |
932S421 chip |
|
Input / Output (per Node) |
|
|
Serial ATA |
Six Serial ATA ports |
|
Six SATA hard drives supported |
|
|
LAN |
2x RJ45 LAN ports |
|
1x RJ45 Dedicated IPMI LAN port |
|
|
USB |
2 rear + 1 header (2 Ports) |
|
4 total USB ports, 2.0 Compliant / 1.1 Compliant |
|
|
VGA |
1x VGA Port |
|
Serial Port |
1 Fast UART 16550 serial port |
|
System BIOS (per Node) |
|
|
BIOS Type |
32Mb SPI Flash EEPROM with AMI® BIOS |
|
BIOS Features |
Plug and Play (PnP) |
|
PCI 2.2 |
|
|
ACPI up to 3.0 |
|
|
USB Keyboard support |
|
|
Chassis |
|
|
Form Factor |
1U Rackmount |
|
Model |
|
|
Dimensions |
|
|
Height |
1.7" (43mm) |
|
Width |
17.2" (437mm) |
|
Depth |
27.75" (705mm) |
|
Gross Weight |
40 lbs (18.1kg) |
|
Available Colors |
Black |
|
Front Panel (per Node) |
|
|
Buttons |
Power On/Off button |
|
System Reset button |
|
|
LEDs |
Power LED |
|
Hard drive activity LED |
|
|
2x Network activity LEDs |
|
|
System Overheat LED |
|
|
Expansion Slots (per Node) |
|
|
PCI-Express |
1 (x16) PCI-E ( Low Profile) |
|
Drive Bays (per Node) |
|
|
Hot-swap |
2x 3.5" SATA Hot-swap drive bays |
|
SATA Backplane |
|
|
1U SATA Backplane |
|
|
System Cooling |
|
|
Fans |
6x Cooling Fans |
|
Power Supply |
|
|
1200W high-efficiency power supply with PMBus |
|
|
AC Input |
100 - 140V, 50 - 60Hz, 7.5 - 11Amp |
|
180 - 240V, 50 - 60Hz, 5 - 8Amp |
|
|
DC Output |
4 Amp |
|
+5V standby |
|
|
DC Output |
74 Amp @ 100-140V |
|
+12V |
100 Amp @ 180-240V |
|
Certification |
80 PLUS Gold Certified |
|
Management |
|
|
Software |
IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
|
Watch Dog |
|
|
NMI |
|
|
Power Configurations |
ACPI Power Management |
|
Main Switch Override Mechansim |
|
|
Power-on mode for AC power recovery |
|
|
PC Health Monitoring |
|
|
CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
|
CPU Core 6-Phase-switching voltage regulator |
|
|
FAN |
Total of four 4-pin PWM fans |
|
4x fans with tachometer monitoring |
|
|
Status monitor for speed control |
|
|
Status monitor for on/off control |
|
|
Low noise fan speed control |
|
|
Temperature |
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
|
Thermal Control for 4x Fan Connectors |
|
|
PSU I2C temperature sensing logic |
|
|
Thermal Monitor 2 (TM2) support |
|
|
PECI |
|
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
