NewsletterLIÊN KẾT WEBSITE
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following:
1. Dual Intel® 5500 series Xeon® Quad/ Dual-Core, with QPI up to 6.4 GT/s
2. Up to 48GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM
3. 1 (x16) PCI-E ( Low Profile)
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Mellanox ConnectX QDR Infiniband 40Gbps Controller w/ QSFP connector
6. Intel® 82576 Dual-Port Gigabit Ethernet Controller
7. 4x Hot-swap 2.5" SATA Drive Bays
8. 1200W Gold-level High-efficiency Power Supply
 |
Integrated Boards  Super X8DTT-IBQF |
Available Colors: Black 
| Product SKUs | |
| SYS-1026TT-IBQF | SuperServer 1026TT-IBQF (Black) |
| Motherboards | Super X8DTT-IBQF + Super X8DTT-IBQF |
| Processor/Cache | |
| CPU | Dual 1366-pin LGA Sockets |
| Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: | |
| Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor) | |
| NOTE: Support processors with Max TDP < 100W | |
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | 12x 240-pin DIMM sockets |
| Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory | |
| Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory | |
| Memory Mirroring supported | |
| Memory Type | 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | |
| Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | |
| On-Board Devices (per Node) | |
| Infiniband | Mellanox ConnectX QDR Infiniband 40Gbps Controller |
| Chipset | Intel® 5500 (Tylersburg) chipset |
| ICH10R + IOH-36D | |
| SATA | Intel ICH10R SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | |
| Winbond® WPCM450 BMC | |
| Network Controllers | Intel® 82576 Dual-Port Gigabit Ethernet Controller |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
| Intel® I/OAT 3 support for fast, scaleable, and reliable networking | |
| VMDq support for better performance of virtualization | |
| 1x Realtek RTL8201N PHY (dedicated IPMI) | |
| Graphics | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond W83527HG chip |
| Clock Generator | 932S421 chip |
| Input / Output (per Node) | |
| Serial ATA | Six Serial ATA ports |
| Six SATA hard drives supported | |
| LAN | 2x RJ45 LAN ports |
| 1x RJ45 Dedicated IPMI LAN port | |
| USB | 2 rear + 1 header (2 Ports) |
| 4 total USB ports, 2.0 Compliant / 1.1 Compliant | |
| VGA | 1x VGA Port |
| Serial Port | 1 Fast UART 16550 serial port |
| Infiniband | 1 External QSFP Infiniband Connector |
| System BIOS (per Node) | |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) |
| PCI 2.2 | |
| ACPI up to 3.0 | |
| USB Keyboard support | |
| Chassis | |
| Form Factor | 1U Rackmount |
| Model | CSE-809TQ-1200B |
| Dimensions | |
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705mm) |
| Gross Weight | 40 lbs (18.1kg) |
| Available Colors | Black |
| Front Panel (per Node) | |
| Buttons | Power On/Off button |
| System Reset button | |
| LEDs | Power LED |
| Hard drive activity LED | |
| 2x Network activity LEDs | |
| System Overheat LED | |
| Expansion Slots (per Node) | |
| PCI-Express | 1 (x16) PCI-E ( Low Profile) |
| Drive Bays (per Node) | |
| Hot-swap | 4x 2.5" SATA Hot-swap drive bays |
| SATA Backplane | |
| 1U SATA Backplane | |
| System Cooling | |
| Fans | 6x Cooling Fans |
| Power Supply | |
| 1200W high-efficiency power supply with PMBus | |
| AC Input | 100 - 140V, 50 - 60Hz, 7.5 - 11Amp |
| 180 - 240V, 50 - 60Hz, 5 - 8Amp | |
| DC Output | 4 Amp |
| +5V standby | |
| DC Output | 74 Amp @ 100-140V |
| +12V | 100 Amp @ 180-240V |
| Certification | 80 PLUS Gold Certified |
| [ Test Report ] | |
| Management | |
| Software | IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support |
| Super Doctor III | |
| Watch Dog | |
| NMI | |
| Power Configurations | ACPI Power Management |
| Main Switch Override Mechansim | |
| Power-on mode for AC power recovery | |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
| CPU Core 6-Phase-switching voltage regulator | |
| FAN | Total of four 4-pin PWM fans |
| 4x fans with tachometer monitoring | |
| Status monitor for speed control | |
| Status monitor for on/off control | |
| Low noise fan speed control | |
| Temperature | Monitoring for CPU and chassis environment |
| CPU thermal trip support | |
| Thermal Control for 4x Fan Connectors | |
| PSU I2C temperature sensing logic | |
| Thermal Monitor 2 (TM2) support | |
| PECI | |
| LED | Power Fail / Overheat LED |
| Suspend-state Indicator LED | |
| UID LED | |
| Other Features | SDDC Support |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10° to 35° C (50° to 95°F) |
| Non-operating Temperature: -40° to 70° C (-40° to 158° F) | |
| Operating Relative Humidity: 8% to 90% (non-condensing) | |
| Non-operating Relative Humidity: 5 to 95% (non-condensing) | |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
