NewsletterLIÊN KẾT WEBSITE
Key Features
1. Single AMD® Opteron™ 1000 Series (Socket AM2/AM3) Support, 800 MHz HyperTransport Link
2. ServerWorks HT1000 Chipset
3. Up to 8 GB DDR2 800/667/533 SDRAM
4. Dual-port Broadcom BCM5704C Gigabit LAN / Ethernet Controller
5. Up to 4 SATA drives via HT1000
6. 1 64-bit PCI-X 133MHz 2 32-bit PCI 33MHz
7. ATI ES1000 Graphics & VGA port
8. 1UIPMI 2.0 Support
| Product SKUs | |||
| MBD-H8SSL-i2-O | H8SSL-i2 (Standard Retail Pack) | ||
| MBD-H8SSL-i2-B | H8SSL-i2 (Bulk Pack) | ||
| Physical Stats | |||
| Form Factor | ATX | ||
| Dimensions | 12.0" x 8.0" (30.5cm x 20.3cm) | ||
| Processor/Chipset | |||
| CPU | * Single 940-pin AM2 Socket * Supports one Quad-Core AMD Opteron™ 1000 Series (Socket AM2/AM3) processor NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor |
||
| System Bus | 800MHz HyperTransport | ||
| Chipset | ServerWorks HT1000 | ||
| System Memory | |||
| Memory Capacity | * Four 240-pin DIMM sockets * Supports up to 8 GB DDR2 800/667/533 MHz memory * Single or Dual (recommended) channel memory |
||
| Memory Type | DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs | ||
| DIMM Sizes | 56 MB, 512 MB, 1GB, 2GB | ||
| Memory Voltage | 1.8 V only | ||
| On-Board Devices | |||
| SATA | 4 SATA Ports using ServerWorks HT1000 controller | ||
| IDE | * Supports UDMA Mode 5 * Supports PIO Mode 4 * Supports ATA/100 |
||
| IPMI | * 1U support: Intelligent Platform Management Interface v.2.0+ * (Optional: AOC-1UIPMI-B) * (Optional: AOC-LPIPMI-LANG) * Remote Management Module * (Card not included) |
||
| Network Controllers | * Broadcom BCM5704C Dual Gigabit Ethernet Controller * Supports 1000BASE-T, RJ45 output |
||
| VGA | ATI ES1000 Graphics Controller 16MB Graphics & VGA port | ||
| Super I/O | Winbond 87427 | ||
| Input / Output | |||
| SATA | Up to four SATA devices | ||
| IDE | * Single ATA 100 EIDE channels support up to two UDMA IDE devices * Supports UDMA Mode 5 * Supports ATA/100 |
||
| Floppy | 1 Floppy port; 1.44 MB | ||
| LAN | 2 RJ45 LAN ports | ||
| USB | * 2 USB Rear Ports * 4 USB Internal Headers * USB 2.0 Compliant, 1.1 Compatible |
||
| VGA | 1 VGA port | ||
| Keyboard / Mouse | PS/2 keyboard and mouse ports | ||
| Serial Ports | * 1 Fast UART 16550 serial ports * 1 Header |
||
| Chassis ( Optimized for H8SSL-i2 ) | |||
| 1U | * CSE-811T-300 * CSE-512F-260 |
||
| Mid-Tower | * CSE-733TQ-645 * CSE-733T-645 * CSE-733i-645 * CSE-733T-450 * CSE-733i-450 |
||
| Important Chassis Notes | To ensure system stability, a 300W (minimum) ATX power supply [4-pin (+12V) and 24-pin are required] | ||
| Expansion Slots | |||
| PCI-X | 1 64-bit 133MHz PCI-X (3.3V) slot | ||
| PCI | 2 PCI 32-bit, 33MHz expansion slots | ||
| System BIOS | |||
| BIOS Type | * 4Mb Flash EEPROM with AMI® BIOS * SST-49LF004B BIOS Chip |
||
| BIOS Features | * Plug and Play (PnP) * DMI 2.3 * PCI 2.2 * ACPI 1.0 * BIOS Rescue Hot Keys * SMBIOS 2.3 * USB Keyboard support * Hardware BIOS Virus Protection |
||
| Management | |||
| Software | * Optional IPMI (Intelligent Platform Management Interface) 2.0 * Super  Doctor III |
||
| Power Configurations | * ACPI Power Management * Wake-On-Ring (WOR) header * Wake-On-LAN (WOL) header * Main Switch Override Mechanism * Power-on mode control for AC power loss recovery * Internal/External modem remote ring-on |
||
| PC Health Monitoring | |||
| CPU | * Monitors CPU Core Voltages, +5V, ±12V, 5.5V Standby, 2.5V Standby, VBAT * Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V * CPU switching voltage regulator |
||
| FAN | * Total up to five 3-pin fan headers * 5 Fan Status Tachometer monitoring * Status Monitor for Speed Control |
||
| Temperature | * Monitoring for CPU and chassis environment * CPU Thermal Trip support * I2C temperature sensing logic |
||
| LED | * CPU / Overheat LED * Suspend-state indicator LED * +5V Standby Alert LED |
||
| Other Features | * Chassis Intrusion Header * Chassis Intrusion Detection * SDDC Support * Chipkill Support |
||
| Operating Environment / Compliance | |||
| RoHS | RoHS Compliant 5/6, Server Exemption | ||
| Environmental Spec. | * Operating Temperature: 10°to 35°C (50°to 95°F) * Non-operating Temperature: -40°to 70°C (-40°to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5 to 95% (non-condensing) |
||
| OS Compatibility | |||
| * Please see our OS Compatibility Chart | |||
| Regulatory | |||
| FCC | Passed to meet FCC standard requirement | ||
|
Parts List |
|||
| Retail Pack List | |||
| Part Number | Qty | Description | |
| H8SSL-i2 | MBD-H8SSL-i2-O | 1 | H8SSL-i2 Motherboard |
| Manual(s) | MNL-H8SSL-i2 | - | Motherboard Manual for H8SSL-i2 |
| Cables | CBL-0010L | 1 | I/O Cable |
| CBL-0022L | 1 | ATX Floppy Cable | |
| CBL-036L-03 | 1 | ATA 100/133 IDE LP Cable | |
| CBL-0044L | 4 | 2ft. SATA Cable | |
| Driver Disk | CDR-A+SWKS | 1 | Version 1.1 (or newer) Chipset Driver CD |
| I/O | CSE-PT7L | 1 | I/O Shield For Dual LAN |
| Retention | BKT-0017L | 1 | Retention Bracket |
| BKT-0018L | 1 | Retention Bracket | |
| Optional Parts List | |||
| Part Number | Qty | Description | |
| Heatsink | SNK-P0026 | - | CPU Heatsink for 1U Systems |
| SNK-P0027P | - | CPU Heatsink for 2U Systems | |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
