| Product SKUs |
| MBD-H8SMA-2-O |
H8SMA-2 (Standard Retail Pack) |
| MBD-H8SMA-2-B |
H8SMA-2 (Bulk Pack) |
| Physical Stats |
| Form Factor |
ATX |
| Dimensions |
* 12" x 9.6 " (30.5cm x 24.4cm)
* 6 layers |
| Processor/Chipset |
| CPU |
* Single 940-pin AM2 Socket
* Supports one Quad-Core AMD Opteron™ 1000 Series (Socket AM2/AM3) processor
NOTE: Motherboard PCB revision 2.xx is needed to support quad-core processor |
| System Bus |
1000MHz HyperTransport |
| Chipset |
nVidia MCP55 Pro |
| System Memory |
| Memory Capacity |
* Four 240-pin DIMM sockets
* Supports up to 8 GB DDR2 800/667/533 MHz memory
* Single or Dual (recommended) channel memory |
| Memory Type |
DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes |
256 MB, 512 MB, 1GB, 2GB |
| Memory Voltage |
1.8 V only |
| On-Board Devices |
| SATA |
* nVidia MCP55 Pro SATA2 3.0Gbps Controller
* 6 SATA Ports
* nVidia RAID 2.0
* SATA RAID 0, 1, 0+1, 5, JBOD Support |
| IDE |
* Supports UDMA Mode 5
* Supports PIO Mode 4
* Supports ATA/100/133 |
| IPMI |
* Support for Intelligent Platform Management Interface v.2.0
* 200-pin IPMI slot (SIMLP)
* (Optional: AOC-SIMLP-B(+) R 3.00)
* (Optional: AOC-SIMLP-3(+) R 3.00) with 3rd LAN support
* NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
* RMM (Remote Management Module)
* (Card not included) |
| Network Controllers |
* nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
* Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Super I/O |
Winbond 83627HF |
| Input / Output |
| SATA |
Up to six SATA2 devices |
| IDE |
* Single ATA 133/100 EIDE channels support up to two UDMA IDE devices
* Supports UDMA Mode 5
* Supports ATA133/100 |
| Floppy |
1 Floppy port 1.44 MB |
| LAN |
2 RJ45 LAN ports |
| USB |
* 4 USB Rear Ports
* 4 USB Internal Headers
* 8 Total USB 2.0 Compliant, 1.1 Compatible |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Ports |
* 2 Fast UART 16550 serial ports
* 1 Header |
| Parallel Port |
1 ECP / EPP parallel port |
| Chassis ( Optimized for H8SMA-2 ) |
| 4U |
* CSE-743T-645
* CSE-743i-645 |
| Mid-Tower |
* CSE-733TQ-645
* CSE-733T-645
* CSE-733i-645
* CSE-733T-450
* CSE-733i-450 |
| Important Chassis Notes |
To ensure system stability, a 300W (minimum) ATX power supply [4-pin (+12V) and 24-pin are required] |
| Expansion Slots |
| PCI-Express |
* 1 x16 PCI-e slot (nVidia SLI Technology Supported)
* 1 x8 PCI-e using x16 slot
* 1 x4 PCI-e using x8 slot |
| PCI |
3 PCI 32-bit, 33MHz slots |
| System BIOS |
| BIOS Type |
4Mb Flash EEPROM with AMI® BIOS |
| BIOS Features |
* Plug and Play (PnP)
* DMI 2.3
* PCI 2.2
* ACPI 2.0
* BIOS Rescue Hot Keys
* SMBIOS 2.3
* USB Keyboard support
* Hardware BIOS Virus Protection |
| Management |
| Software |
* Optional IPMI (Intelligent Platform Management Interface) 2.0
* Super Doctor III |
| Power Configuration |
* ACPI Power Management
* Wake-On-Ring (WOR) header
* Wake-On-LAN (WOL) header
* Main Switch Override Mechanism
* Power-on mode control for AC power loss recovery
* Internal/External modem remote ring-on |
| PC Health Monitoring |
| CPU |
* Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
* Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
* CPU switching voltage regulator |
| FAN |
* Total up to five 4-pin fan headers
* 5 Fan Status Tachometer monitoring
* Status Monitor for Speed Control |
| Temperature |
* Monitoring for CPU and chassis environment
* CPU Thermal Trip support
* I2C temperature sensing logic |
| LED |
* CPU / Overheat LED
* Suspend-state indicator LED
* +5V Standby Alert LED |
| Other Features |
* Chassis Intrusion Header
* Chassis Intrusion Detection
* Chipkill Support |
| Operating Environment / Compliance |
| RoHS |
RoHS Compliant 6/6, Pb Free |
| Environmental Spec. |
* Operating Temperature: 10?to 35?C (50?to 95?F)
* Non-operating Temperature: -40?to 70?C (-40?to 158?F)
* Operating Relative Humidity: 8% to 90% (non-condensing)
* Non-operating Relative Humidity: 5 to 95% (non-condensing) |
| OS Compatibility |
| • Please see our OS Compatibility Chart |
| Regulatory |
| FCC |
Class B |
|
Parts List
|
| Retail Pack List |
| |
Part Number |
Qty |
Description |
| H8SMA-2 |
MBD-H8SMA-2-B |
1 |
H8SMA-2 Motherboard |
| Manual(s) |
MNL-H8SMA-2 |
1 |
Motherboard Manual for H8SMA-2 |
| I/O Cables |
CBL-0010L |
1 |
I/O Cable |
| CBL-0022L |
1 |
ATX Floppy Cable |
| CBL-036L-03 |
1 |
ATA 100/133 IDE LP Cable |
| CBL-0044L |
6 |
2ft. SATA Cable |
| Driver Disk |
CDR-A+NVDA2 |
1 |
Version 1.0 (or newer) Chipset Driver CD |
| Retention |
BKT-0017L |
1 |
Backplate For AMD AM2 CPU |
| BKT-0018L |
1 |
Retention Module For AMD AM2 CPU |