NewsletterLIÊN KẾT WEBSITE
Key Features
1. Two Six-Core / Quad-Core AMD Opteron™ 2000 Series (Socket F) support; HT3.0 Link support
2. nVidia® MCP55 Pro Chipset, NEC uPD720400
3. Up to 64GB DDR2 800/667/533 SDRAM
4. MCP55 Pro Chipset Dual-Port Gigabit LAN / Ethernet Controller
5. 6 SATA2 3.0Gbps Ports
6. Left Universal Slot: 1 64-bit PCI-X 133MHz OR (x8) PCI-E
7. Right Universal Slot: 1 64-bit PCI-X 100MHz OR (x8) PCI-E
8. ATI ES1000 16MB Graphics
9. 5 Fan support with Speed Control
10. SIM1U IPMI 2.0 Support
| Product SKUs | |||
| MBD-H8DMR-i2-O | H8DMR-i2 (Standard Retail Pack) | ||
| MBD-H8DMR-i2-B | H8DMR-i2 (Bulk Pack) | ||
| Physical Stats | |||
| Form Factor | Extended ATX | ||
| Dimensions | 12" x 13.05" (30.5cm x 33.2cm) | ||
| Processor/Chipset | |||
| CPU | * Dual 1207-pin Socket F * Supports up to two Six-Core AMD Opteron™ 2000 Series processors * HT3.0 Link support |
||
| Two Hyper-Transport links between the CPUs | |||
| Chipset | * nVidia MCP55 Pro * NEC uPD720400 |
||
| System Memory | |||
| Memory Capacity | * 8x 240-pin DIMM sockets support up to 64GB DDR2 800/667/533/400 MHz SDRAM * Single or Dual (recommended) channel memory support * For Single CPU: Memory must be populated in CPU1 DIMMs only * For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
||
| Memory Type | DDR2 800/667/533/400MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs | ||
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB | ||
| Memory Voltage | 1.8 V only | ||
| Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) |
||
| On-Board Devices | |||
| SATA | * nVidia MCP55 Pro SATA2 3.0Gbps Controller * 6 SATA Ports * nVidia RAID 2.0 * SATA RAID 0, 1, 0+1, 5, JBOD Support |
||
| IPMI | * Support for Intelligent Platform Management Interface v.2.0 * 200-pin IPMI slot * (Optional: AOC-SIM1U-3B(+) R 3.00) * (Optional: AOC-SIM1U-3D R 3.00) conjuntion with AOC-SIM1U-3B(+) * (Card not included) |
||
| Network Controllers | * nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller * Supports 10Base-T, 100Base-TX, and 1000Base-T, RJ45 output |
||
| Super I/O | Winbond 83627HF | ||
| VGA | ATI ES1000 Graphics Controller 16MB Graphics & VGA port | ||
| Input / Output | |||
| Serial ATA | * Six SATA2 Ports * Six SATA2 hard drives supported |
||
| IDE | * Single EIDE channel support up to two UDMA IDE devices * Supports UDMA Mode 5 * Supports PIO Mode 4 * Supports ATA 100/133 |
||
| Floppy | 1 Floppy port, 1.44 MB | ||
| LAN | 2 RJ45 LAN ports | ||
| USB | * FUCI * Up to 4 USB Ports 2.0 Compliant, 1.1 Compatible * Two Rear Ports * Two Internal Headers |
||
| VGA | One VGA port | ||
| Keyboard / Mouse | PS/2 keyboard and mouse ports | ||
| Serial Ports | * One Fast UART 16550 serial port * One header |
||
| Chassis ( Optimized for H8DMR-i2 ) | |||
| 1U Chassis | CSE-815TQ+-560 | ||
| Important Chassis Notes | To ensure system stability, a 560W (minimum) ATX power supply [4-pin (+12V), 8-pin (+12V) and 20-pin are required] | ||
| Expansion Slots | |||
| Universal PCI-e / PCI-X | Two Universal PCI-e / PCI-X Slots | ||
| Slot 1 | * One PCI-express x8 Slot OR * One 64-bit 133MHz PCI-X slot |
||
| Slot 1 | * One PCI-express x8 Slot OR * One 64-bit 100MHz PCI-X slot |
||
| System BIOS | |||
| BIOS Type | * 8Mb Flash EEPROM with AMI® BIOS * SST49LF080A BIOS Chip |
||
| BIOS Features | * Plug and Play (PnP) * DMI 2.3 * PCI 2.2 * ACPI 2.0 * USB Keyboard Support |
||
| Management | |||
| Software | * Super Doctor III* Watch Dog / NMI * Optional IPMI 2.0 |
||
| Power Configurations | * ACPI Power Management * Main Switch Override Mechanism * Wake-On-Ring (WOR) headert * Wake-On-LAN (WOL) header * Keyboard Wakeup from Soft-Off * Power-on mode control for AC power loss recovery * Internal/External modem remote ring-on |
||
| PC Health Monitoring | |||
| CPU | * Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT, Chipset * CPU switching voltage regulator |
||
| FAN | * Up to 5-fan status tachometer monitoring * Up to five 3-pin fan headers * Status monitor for speed control * Stauts monitor for on/off control * Support 3-pin fans w/ fan-speed control * Low noise fan speed control * Overheat backup fan connector |
||
| Temperature | * Monitoring for CPU and chassis environment * CPU Thermal Trip Support * I2C Temperature Sensing Logic |
||
| LED | * CPU / System Overheat LED * Suspend-State Indicator LED * +5V Standby Alert LED |
||
| Other Features | * Chassis Intrusion Header * Chassis Intrusion Detection |
||
| Operating Environment / Compliance | |||
| RoHS | RoHS Compliant 5/6, Server Exemption | ||
| Environmental Spec. | * Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
||
| OS Compatibility | |||
| • Please see our OS Compatibility Chart | |||
| Regulatory | |||
| FCC | Passed to meet FCC standard requirement | ||
|
Parts List |
|||
| Retail Pack List | |||
| Part Number | Qty | Description | |
| H8DMR-i2 | MBD-H8DMR-i2-O | 1 | H8DMR-i2 Motherboard |
| Manual(s) | MNL-H8DMR-i2 | - | Motherboard Manual for H8DMR-i2 |
| I/O Cables | CBL-0022L | 1 | ATX Floppy Cable |
| CBL-036L-03 | 1 | ATA 100/133 IDE LP Cable | |
| Driver Disk | CDR-A+NVDA2 | 1 | Version 1.00 (or newer) Chipset Driver CD |
| Retention | BKT-00012L | 2 | CPU Heat Sink Back Plate |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
