NewsletterLIÊN KẾT WEBSITE
Key Features
1. Four Six-Core / Quad-Core AMD Opteron™ 8000 Series (Socket F) support; HT3.0 Link support
2. nVidia MCP55 Pro / AMD 8132 Chipsets
3. Up to 128GB DDR2-800/667/533 SDRAM
4. Intel 82546GB Dual-port Gigabit LAN/Ethernet Controller
5. 6 SATA2 3.0Gbps Ports
6. 1 (x16), PCI-Express, 1 HyperTransport (HTX) Slots
7. SIMSO IPMI 2.0 Support
8. 9 Fan Support with Speed Control
| Product SKUs | |||
| MBD-H8QME-2+-O | H8QME-2+ (Standard Retail Pack) | ||
| MBD-H8QME-2+-B | H8QME-2+ (Bulk Pack) | ||
| Physical Stats | |||
| Form Factor | Proprietary | ||
| Dimensions | 16" x 13" (40.6cm x 33.2cm) | ||
| Processor/Chipset | |||
| CPU | * Quad 1207-pin Socket F * Supports up to four Six-Core AMD Opteron™ 8000 Series processors * HT3.0 Link support |
||
| Chipset | * nVidia MCP55 Pro * AMD 8132 |
||
| System Memory | |||
| Memory Capacity | * Sixteen 240-pin DIMM sockets * Supports up to 128GB DDR2 800/667/533 MHz memory * Single or Dual (recommended) channel memory support * For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks |
||
| Memory Type | DDR2 800/667/533MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs | ||
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB | ||
| Memory Voltage | 1.8V only | ||
| Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) |
||
| On-Board Devices | |||
| SATA | * nVidia MCP55 Pro SATA2 3.0Gbps Controller * 6 SATA2 Ports * nVidia RAID 2.0 * SATA RAID 0, 1, 0+1, 5, JBOD Support |
||
| IPMI | * Support for Intelligent Platform Management Interface v.2.0 * 200-pin IPMI slot (SIMSO) * (Optional: AOC-SIMSO R 3.00) * NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot * RMM (Remote Management Module) * (Card not included) * For Dedicated LAN, cable CBL-0177L must be used (cable sold separately) |
||
| Network Controllers | * Intel® 82546GB Dual Port Gigabit Ethernet Controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
||
| Super I/O | Winbond 83627HF | ||
| VGA | ATI ES1000 Graphics Controller 16MB Graphics & VGA port | ||
| System BIOS | |||
| BIOS Type | * 8Mb Flash EEPROM with AMI® BIOS * SST 49LF080A BIOS Chip |
||
| BIOS Features | * Plug and Play (PnP) * DMI 2.3 * PCI 2.2 * ACPI 2.0 * USB Keyboard Support * SMBIOS 2.3 |
||
| Expansion Slots | |||
| PCI-Express | 1 x16 PCI-e Slots | ||
| HyperTransport | 1 HyperTransport (HTX) Connectors | ||
| Chassis ( Optimized for H8QME-2+ ) | |||
| Chassis 1U | CSE-818TQ+-1000 (Riser card : CSE-RR1U-E16 Rev.3.2) |
||
| Important Chassis Notes | To ensure system stability, a 1000W (minimum) ATX power supply [ 8-pin & 8-pin (+12V) and 24-pin are required] |
||
| Input / Output | |||
| SATA | 6 SATA2 ports | ||
| IDE | * Single EIDE channel support up to two UDMA IDE devices * Supports UDMA Mode 5 * Supports PIO Mode 4 * Supports ATA 100/133 |
||
| Floppy | 1 Floppy port; 1.44 MB support | ||
| LAN | 2 RJ45 LAN ports | ||
| USB | * FUCI * Up to 4 USB Ports 2.0 Compliant * 2 Rear Ports * 2 Internal Headers |
||
| Keyboard / Mouse | PS/2 keyboard and mouse ports | ||
| Serial Ports | * 1 Fast UART 16550 serial ports * 1 Header |
||
| VGA | 1 VGA port | ||
| Management | |||
| Software | * Optional IPMI (Intelligent Platform Management Interface) 2.0 * Super  Doctor III* Watch Dog |
||
| Power Configurations | * ACPI Power Management * Main Switch Override Mechanism * Wake-On-Ring (WOR) headert * Wake-On-LAN (WOL) header * Keyboard Wakeup from Soft-Off * Power-on mode control for AC power loss recovery * Internal/External modem remote ring-on |
||
| PC Health Monitoring | |||
| CPU | * Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT * CPU switching voltage regulator |
||
| FAN | * Total up to 9-fan status tachometer monitoring * Up to nine 3-pin fan headers * Status monitor for speed control * Support 3-pin fans with fan-speed control * Low noise fan speed control |
||
| Temperature | * Monitoring for CPU and chassis environment * CPU Thermal Trip Support * PC Temperature Sensing Logic |
||
| LED | * CPU / System Overheat LED * Suspend-State Indicator LED * +5V Standby Alert LED |
||
| Other Features | * Chassis Intrusion Detection * Chassis Intrusion Header |
||
| Operating Environment / Compliance | |||
| RoHS | RoHS Compliant 5/6, Server Exemption | ||
| Environmental Specifications | * Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
||
| OS Compatibility | |||
| Please see our OS Compatibility Chart | |||
| Regulatory | |||
| FCC | Passed to meet FCC standard requirement | ||
|
Parts List |
|||
| Retail Pack List | |||
| Part Number | Qty | Description | |
| H8QME-2+ | MBD-H8QME-2+-B | 1 | H8QME-2+ Motherboard |
| Air Shroud | CSE-PT0115L-A | 1 | Air Shroud |
| Manual(s) | MNL-H8QME-2+ | - | Motherboard manual for H8QME-2+ |
| I/O Cables | CBL-0022L | 1 | ATX Floppy Cable |
| CBL-036L-03 | 1 | ATA 100/133 IDE LP Cable | |
| CBL-0044L | 6 | 2Ft. SATA Cable | |
| Driver Disk | CDR-A+NVDA2 | 1 | Version 1.00 (or newer) Chipset Driver CD |
| Retention | BKT-0012L | 4 | Retention bracket |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
