NewsletterLIÊN KẾT WEBSITE
Key Features
1. Four Six-Core / Quad-Core AMD Opteron™ 8000 Series (Socket F) support; HT3.0 Link support
2. Dual AMD SR5690 + SP5100 Chipset
3. Up to 128GB Registered ECC DDR2 800/667/533 SDRAM in 16 DIMM
4. Intel® 82576 controllers, Dual-Port Gigabit Ethernet
5. 6x SATA2 (3 Gb/s) ports via AMD SP5100 controller
6. 6x USB 2.0 ports: 2x rear, 2x header, and 2x type A
7. 3x PCI-e 2.0 x16, 1x PCI-e 2.0 x8, 2x PCI-e 2.0 x4 (in x8 slot), 1x UIO slot
8. Integrated Matrox G200eW with 16MB graphics
9. IPMI 2.0 with dedicated LAN support
| Product SKUs | |||
| MBD-H8QIi-F-O | H8QIi-F (Standard Retail Pack) | ||
| MBD-H8QIi-F-B | H8QIi-F (Bulk Pack) | ||
| Physical Stats | |||
| Form Factor | Proprietary | ||
| Dimensions | 16.4" x 13" (41.7cm x 33.0cm) | ||
| Processor/Chipset | |||
| CPU | * Quad 1207-pin Socket F * Supports up to four Six-Core AMD Opteron™ 8000 Series processors * HT3.0 Link support |
||
| Chipset | Dual AMD SR5690 + SP5100 Chipset | ||
| System Memory | |||
| Memory Capacity | * Sixteen 240-pin DIMM sockets * Support up to 128GB memory * Dual channel memory bus; Single or Dual (recommended) channel memory support * For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
||
| Memory Type | DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs | ||
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB | ||
| Memory Voltage | 1.8V only | ||
| On-Board Devices | |||
| SATA | AMD SP5100 (RAID 0, 1, 10) | ||
| IPMI | * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM over LAN support * Winbond® WPCM450 BMC |
||
| Network Controllers | * Intel® 82576 controller, Dual-Port Gigabit Ethernet * 10/100/1000BASE-T support |
||
| VGA | Matrox G200eW 16MB DDR2 graphics | ||
| Super I/O | Winbond® 83627DHG chip | ||
| Input / Output | |||
| SATA | 6x SATA2.0 (3Gb/s) Ports | ||
| IDE | * Single EIDE channel support up to two UDMA IDE devices * Supports UDMA Mode 5 * Supports PIO Mode 4 * Supports ATA 100/133 |
||
| LAN | * 2 RJ45 LAN ports * 1 RJ45 Dedicated LAN supports IPMI |
||
| USB | * 6x USB 2.0 ports * 2x Rear / 2x header / 2x type A |
||
| VGA | 1x VGA port | ||
| Keyboard / Mouse | PS/2 keyboard and mouse ports | ||
| Serial Ports | * 1x Fast UART 16550 serial port * 1x serial port header |
||
| Expansion Slots | |||
| PCI-Express | * 3x PCI-e 2.0 x16 * 1x PCI-e 2.0 x8 * 2x PCI-e 2.0 x4 (in x8 slot) * 1x UIO slot |
||
| Recommended Chassis | |||
| Chassis | SC818TQ+-1000, SC828TQ | ||
| System BIOS | |||
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS | ||
| BIOS Features | * Plug and Play (PnP) * DMI 2.3 * PCI 2.2 * ACPI 2.0 * USB Keyboard Support * SMBIOS 2.3 |
||
| Management | |||
| Software | * IPMI (Intelligent Platform Management Interface) 2.0 * Super  Doctor III |
||
| Power Configurations | * ACPI Power Management * Wake-On-LAN (WOL) header * Keyboard Wakeup from Soft-Off * Power-on mode control for AC power loss recovery |
||
| PC Health Monitoring | |||
| CPU | * Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset * CPU switching voltage regulator |
||
| FAN | * Up to 9-fan status tachometer monitoring * Up to nine 4-pin fan headers * Status monitor for speed control * 3-pin fan support (w/o speed control) * Low noise fan speed control (4-pin fan only) * Pulse Width Modulated (PWM) fan connectors |
||
| Temperature | * Monitoring for CPU and chassis environment * CPU Thermal Trip Support * I2C Temperature Sensing Logic |
||
| LED | * CPU / System Overheat LED * +5V Standby Alert LED |
||
| Other Features | * Chassis Intrusion Detection * Chassis Intrusion Header |
||
| Operating Environment / Compliance | |||
| RoHS | RoHS Compliant 5/6, Server Exemption | ||
| Environmental Specifications | * Operating Temperature: 10°C to 35°C (50°F to 95°F) * Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5% to 95% (non-condensing) |
||
| Regulatory | |||
| FCC | Passed to meet FCC standard requirement | ||
|
Parts List |
|||
| Retail Pack List | |||
| Part Number | Qty | Description | |
| Motherboard | MBD-H8QIi+-F | 1 | H8QIi-F Motherboard: MBD-H8QIi-F-O (retail) / MBD-H8QIi-F-B (bulk) |
| Manual | MNL-H8QIi-F | - | Motherboard Manual for H8QIi-F |
| I/O Cables | CBL-0010L | 1 | 9-pin Serial Port Cable |
| CBL-0036L-03 | 1 | ATA 66/100 IDE LP Cable | |
| CBL-0044L | 6 | 2ft. Amphenol, SATA Cable | |
| Driver Disk | CDR-APLUS2 | 1 | Version 1.00 (or newer) Chipset Driver CD |
| I/O Shield | MCP-260-00027-0N | 1 | Standard I/O shield |
| Retention | BKT-0012L | 4 | Retention Bracket |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
