1000W
Server,Workstation,Storage System
220.00x150.00x86.00 (mm)
8.66x5.91x3.39 (inch)
VOLTAGE: 90 ~ 264 VAC FULL RANGE
FREQUENCY: 47 ~ 63 Hz.
STEADY-STATE CURRENT: 14/7A AT ANY LOW/
HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 20A MAX. FOR 110 VAC ,
40A MAX. FOR 220 VAC
(AT 25 DEGREE C AMBIENT COLD START)
PFC: UP TO THE TARGET OF 95% @230V, FULL LOAD
 |
| Output Voltage |
Output Current Min. |
Output Current Max. |
Output Current Peak |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
| +5V |
1 |
25.00 |
|
±250mV |
±1% |
60mV |
|
|
 |
| +12V1 |
1 |
50 |
|
±600mV |
±1% |
120mV |
|
|
|
| +12V2 |
1 |
50 |
|
±600mV |
±1% |
120mV |
|
|
|
| -12V |
0 |
0.8 |
|
±600mV |
±1% |
120mV |
|
|
|
| +3.3V |
1 |
25 |
|
±165mV |
±1% |
60mV |
|
|
|
| +5VSB |
0.1 |
3.5 |
|
±250mV |
±1% |
60mV |
|
|
|
|
+3.3V and +5V MAX. POWER: 170W
+3.3V AND +5V AND +12V2 MAX. POWER:600W
TOTAL POWER: 1000W(MAX) |
‧TEMPERATURE RANGE: OPERATING 0℃ -- 40℃; STORAGE TEMPERATURE: -20℃ – 80℃
‧HOLD UP TIME: 18mS MINIMUM AT 90V FULL LOAD & NOMINAL INPUT VOLTAGE
‧EFFICIENCY: 81%-86% TYPICAL AT 115V, FULL LOAD
‧LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 264VAC
‧POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
‧OVER POWER PROTECTION: 110%~160%
‧OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.5~6.5V, +12V1→13.2~15.6V, +12V2→13.2~15.6V
‧OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→ 27.5~37.5A, +12V1→55~75A, +12V2→55~75A
‧SHORT CIRCUIT PROTECTION: +3.3V, +5V, +12V1, +12V2, -12V
‧SAFETY: TUV, CB, CCC, RFI/EMI STANDARDS
‧EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
‧COOLING: 8 0mm DC FANS
‧I2C FEATURES (OPTIONAL) |
|
|
|
Newsletter
Giỏ hàng
