600W
Server,Workstation,Storage System
300.00x100.00x40.50 (mm)
11.81x3.94x1.59 (inch)
TOTAL CURRENT OF V1 AND V2 NOT EXCEED EACH MAX LOAD (FOR EXAMPLE: +12V1 & +12V2 NOT EXCEED 45A
TOTAL OUTPUT POWER OF V1 AND V2 NOT EXCEED 600W
THE OUTPUT CURRENT OF 5V & 3.3V NOT EXCEED 40A
| Output Voltage |
Output Current Min. |
Output Current Max. |
Output Current Peak |
Regulation Load |
Regulation Line |
Output Ripple & Noise Max.[P-P] |
| +5V1, +5V2 |
0.5 |
25.00 |
|
±5% |
±1% |
50mV |
|
|
 |
| +12V1, +12V2 |
2 |
45 |
|
±5% |
±1% |
120mV |
|
|
|
| -12V1, -12V2 |
0 |
0.8 |
|
±5% |
±1% |
120mV |
|
|
|
| +3.3V1, +3.3V2 |
0.5 |
25 |
|
±5% |
±1% |
50mV |
|
|
|
| +5VSB1, +5VSB2 |
0.1 |
3.5 |
|
±5% |
±1% |
50mV |
* TEMPERATURE RANGE：OPERATING 0℃～50℃
* HOLD UP TIME：16mS MINIMUM AT FULL LOAD & NOMINAL INPUT VOLTAGE
* DIELECTRIC WITHSTAND：INPUT/OUTPUT 1800 VAC FOR 1 SECOND INPUT TO FRAME GROUND 1800 VAC FOR 1 SECOND
* EFFICIENCY：TYPICAL 80-83% AT 25℃ 115V FULL LOAD
* POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
* OVER POWER PROTECTION：110～150% MAX
* OVER VOLTAGE PROTECTION：+5V→5.6V～6.5V, +3.3V→3.6V～4.3V, +12V→13.2V～15V
* SHORT CIRCUIT PROTECTION：+5V、+12V、+3.3V
* RESTART AFTER PROTECTION: OPP/OVP
* EMI NOISE FILTER : FCC CLASS A, CISPR22 CLASS A
* SAFETY: TO MEET UL, CUL, TUV, CCC
* REMOTE ON/OFF CONTROL
THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY). AS LOGIC LEVEL IS LOW，OUTPUTS VOLTAGE WERE ENABLE， AS LOGIC LEVEL IS HIGH，OUTPUTS VOLTAGE WERE DISABLE.
* 3.3V & 5V REMOTE SENSING
* COOLING: ONE 40mm DC FANS
* MEET IEC-1000-3-2 CLASS D
Newsletter
Giỏ hàng
