• Dual 1567-pin LGA Sockets
• Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
  • Intel® Xeon®Processor 7500 Series (Nehalem-EX) - 95W

• up to 6.4 GT/s

• 32x 240-pin DIMM sockets
• Supports up to 256 GB 1066 / 978 / 800MHz DDR3 ECC Registered memory
• Memory Mirroring supported

• 1066 / 978 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

• 1GB, 2GB, 4GB , 8GB

• 1.5 V, 1.35V

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

• Intel® 7500 (Boxboro-EX) chipset
• ICH10R

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5 support (Windows)
• RAID 0, 1 support (Linux)

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond® WPCM450 BMC

• Intel® 82576 Dual-Port Gigabit Ethernet Controllers
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

• Matrox G200eW 16 MB DDR2

• Winbond 83527HB chip

• Six Serial ATA ports
• Six SATA hard drives supported

• 3x RJ45 LAN ports

• 2x USB rear ports
• 2x USB internal headers (3 ports)
• Total 5 USB 2.0 Compliant

• 1x VGA Port

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header

• 32Mb SPI Flash EEPROM with AMI® BIOS

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

• Power On/Off button
• System Reset button

• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED

• 1 x16 PCI-E 2.0 Slot

• 3x 3.5" Hot-swap SAS?SATA Drives Supported

• Slim 8x DVD, 24x CD, DVD-ROM drive

• 6x heavy-duty counter-rotating fans with optimal fan speed control

• 1x Air Shroud for CPU

• 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
• 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp

• 4 Amp

• 100 Amp @ 100-140V
• 116 Amp @ 180-240V

• Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
• 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V

• Total of 10 fan headers supporting up to 10 fans
• Ten 4-pin fan headers
• 10x fans with tachometer status monitoring
• Support 4-pin fans (w/o speed control)
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• Thermal Control for 8x fan connectors
• PECI

• Chassis intrusion detection
• Chassis intrusion header

• Operating Temperature: 10° to 35° C (50° to 95°F)
• Non-operating Temperature: -40° to 70° C (-40° to 158° F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List