• Two 200-pin SO-DIMM sockets
• Supports up to 4 GB of unbuffered, non-ECC DDR2 667MHz SO-DIMM (Single Channel)

• DDR2 667MHz unbuffered, non-ECC SO-DIMM

• 256 MB, 512 MB, 1 GB, 2GB

• 1.8V only

• Intel ICH9R
• Intel 82574L

• Intel ICH9R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows Only)

• 2x Intel 82574L Gigabit Ethernet
• Supports 10BASE-T, 100/1000BASE-TX, RJ45 output

• Onboard Intel GMA3150 video

• Winbond 83627DHG chip

• 6 Serial ATA ports ( 3Gbps )

• 2x RJ45 LAN port

• 8x USB 2.0 / 1.1 compatible
• 2 rear + 3 headers (5 ports) + 1 Type A connector

• D-Sub 15

• PS/2 keyboard and mouse ports

• 1x Fast UART 16550 serial port
• 1x Serial Header

• 8Mb Flash EEPROM with AMI BIOS

• Plug and Play (PnP)
• DMI 2.3
• PCI 2.2
• ACPI 1.0 / 2.0 / 3.0
• USB Keyboard support
• SMBIOS 2.3

• 1 (x4) PCI-Express (in x16 slot)

• Super Doctor III
• Watch Dog

• ACPI/APM Power Management
• Main Switch Override Mechanism
• Suspend to RAM (STR)
• Power-on mode control for AC power recovery
• Internal / External modem remote ring-on

• Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset
• CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V

• Total of two 4-pin fan headers
• 2 x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on / off control
• Support 3-pin fans (without speed control)
• Low noise fan speed control
• Pulse Width Modulated (PWM) fan conn.

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 2 x Fan Connectors
• I2C temperature sensing logic
• Thermal Monitor 2 (TM2) Support

• CPU / System Overheat LED

• Chassis intrusion Detection
• Chassis intrusion Header
• SDDC Support

• Operating Temperature: 0°to 55°C
• Non-operating Temperature: -40°to 70°C
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List