• SuperServer 6016T-MTHF (Black)

• up to 6.4 GT/s

• 6x 240-pin DIMM sockets
• Supports up to 48 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

• 1GB, 2GB, 4GB , 8GB**

• 1.5 V

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

• Intel® 5500 (Tylersburg) chipset
• ICH10R + IOH-24D

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond® WPCM450 BMC

• 2x Intel® 82574L Gigabit Ethernet Controllers
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

• Matrox G200eW

1. Winbond 83827HF chip

• Six Serial ATA ports
• Six SATA hard drives supported

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

• 2x USB rear ports
• 1x USB on-board
• 2x USB internal headers
• Total 6 USB 2.0 Compliant

• 1x VGA Port

• PS/2 keyboard and mouse ports

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header (Option)

• 32Mb SPI Flash EEPROM with AMI® BIOS

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

• 1U Rackmount

• CSE-813MTQ-600CB

• 1.7" (43mm)

• 17.2" (437mm)

• 19.8" (503mm)

• 31 lbs (14.1kg)

• Black

• Power On/Off button
• System Reset button

• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED

• 2x Front USB Ports
• 1x Serial COM Port

• Please refer to the
  Front Bezel Compatibility Table

• 1 PCI-E(x8) in x16 slot

• 4x 3.5" Hot-swap SATA drive bays

• Slim DVD-ROM drive (Optional)

• 4x 4cm heavy duty RPM fans

• 100-240 V, 50-60 Hz, 7.5-3.1 Amp

• 20 Amp

• 3 Amp

• 49 Amp

• 16 Amp

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
• 4-Phase-switching voltage regulator

• Total of six fan headers supporting up to 6 fans
• Six 4-pin fan headers
• 6x fans with tachometer status monitoring
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• Thermal Control for 6x fan connectors
• PECI

• Chassis intrusion detection
• Chassis intrusion header

• Operating Temperature: 10°to 35°C (50°to 95°F)
• Non-operating Temperature: -40°to 70°C (-40°to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List