• SuperServer 6016GT-TF-FM105 (Black)

• up to 6.4 GT/s

• 12x 240-pin DIMM sockets
• Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

• 1GB, 2GB, 4GB , 8GB , 16GB

• 1.5 V / 1.35V

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

• 1x Nvidia Fermi M2050 GPU Card

• Intel® 5520 (Tylersburg) chipset
• ICH10R + IOH-36D

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond® WPCM450 BMC

• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization
• 1x Realtek RTL8201N PHY (dedicated IPMI)

• Matrox G200eW 8 MB DDR2

• Winbond W83527HG chip

• 932S421 chip

• Six Serial ATA ports
• Six SATA hard drives supported

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

• 2 rear + 1 header (2 Ports)
• 4 total USB ports, 2.0 Compliant / 1.1 Compliant

• 1x VGA Port

• 1 Fast UART 16550 serial port

• 32Mb SPI Flash EEPROM with AMI® BIOS

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

• 1U Rackmount

• CSE-818G-1400B

• Power On/Off button
• System Reset button

• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED / Fan fail LED / UID LED

• 1 (x4) PCI-E 2.0 (in x16 slot -Low Profile)
• 1 (x16) PCI-E 2.0 (for GPU card)
• 2 (x8) PCI-E 2.0 slots

• 3x 3.5" Hot-swap SAS/SATA drive bays

• 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control

• 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
• 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp

• 4 Amp

• 100 Amp @ 100-140V
• 116 Amp @ 180-240V

• Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator

• Total of four 4-pin PWM fans
• 4x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 4x Fan Connectors
• PSU I²C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI

• Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED

• SDDC Support

• Operating Temperature: 10° to 35° C (50° to 95°F)
• Non-operating Temperature: -40° to 70° C (-40° to 158° F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List