NewsletterLIÊN KẾT WEBSITE
SuperServer 6026TT-HDIBQRF 2U Twin with QDR Infiniband 6 HDD per 1U
* 2 x Intel® Xeon® Quad Core Processor E5606, 2.13GHz, 8M QPI 4.8 GT/sec, LGA1366
(Support Intel® Xeon® 5500/5600 Sequence - 8/12 Processor Cores)
* 2 x 2GB DDR3 1333 240-Pin DDR3 ECC Registered (PC3 10666)
* 2 x WD RE4 Enterprise 250GB SATA 3Gb/s 7200RPM 64MB 3.5"
* 2x Dual Intel® 82574L Gigabit Ethernet Controllers
* Integrated IPMI 2.0 with KVM and Dedicated LAN
* Mellanox ConnectX QDR Infiniband 40Gbps Controller w/ QSFP connector
* 1400W Gold-level High-efficiency Redundant Power Supply
Key Features
Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
2. Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
3. 2 (x8) PCI-E (FH/HL) w/ riser card (in x16 slots)
4. Integrated IPMI 2.0 with KVM and Dedicated LAN
5. Dual Intel® 82574L Gigabit Ethernet Controller
6. 6x Hot-swap SATA Drive Bays
7. 1400W Gold-level High-efficiency Redundant Power Supply
8. Mellanox ConnectX QDR Infiniband 40Gbps Controller w/ QSFP connector
 |
2 Integrated Boards  Super X8DTT-HIBQF+ |
Available Colors: Black 
Drivers & Utilities BIOS Manuals Tested Memory List Tested HDD List
| Product SKUs | |
| SYS-6026TT-HDIBQRF | SuperServer 6026TT-HDIBQRF (Black) |
| Motherboard | |
| 2x Super X8DTT-HIBQF+ | |
| Processor/Cache | |
| CPU | # Dual 1366-pin LGA Sockets # Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: * Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W * Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W |
| QPI | up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | * 12x 240-pin DIMM sockets * Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory * Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory * Memory Mirroring supported |
| Memory Type | * 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | * 1GB, 2GB, 4GB , 8GB** , 16GB** |
| Memory Voltage | * 1.5 V |
| Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) * Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices (per Node) | |
| Infiniband | * Mellanox ConnectX QDR Infiniband 40Gbps Controlle |
| Chipset | * Intel® 5520 (Tylersburg) chipset * ICH10R |
| SATA | * Intel ICH10R SATA 3.0Gbps Controller * RAID 0, 1, 5, 10 support |
| IPMI | * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Winbond® WPCM450 BMC |
| Network Controllers | * Dual Intel® 82574L Gigabit Ethernet Controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * Intel® I/OAT 3 support for fast, scaleable, and reliable networking * VMDq support for better performance of virtualization * 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | Matrox G200eW |
| Super I/O | Winbond W83527HG chip |
| Clock Generator | 932S421 chip |
| Input / Output (per Node) | |
| Serial ATA | * Six Serial ATA ports * 6 SATA hard drives supported |
| LAN | * 2x RJ45 LAN ports * 1x RJ45 Dedicated IPMI LAN port |
| USB | * 2 rear + 1 header (2 Ports) * 4 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA | * 1x VGA Port |
| Serial Port | * 1 Fast UART 16550 serial port |
| Infiniband | * 1 External QSFP Infiniband Connector |
| System BIOS (per Node) | |
| BIOS Type | * 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | * Plug and Play (PnP) * PCI 2.2 * ACPI up to 3.0 * USB Keyboard support |
| Chassis | |
| Form Factor | 2U Rackmount |
| Model | CSE-827HD-R1400B |
| Dimensions | |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 28.5" (724mm) |
| Gross Weight | 85 lbs (38.6kg) |
| Available Colors | Black |
| Front Panel (per Node) | |
| Buttons | * Power On/Off button * UID button |
| LEDs | * Power LED (on power button) * Network activity LED * System Overheat/fan fail/power fail/ LED * UID LED (on UID button) |
| Expansion Slots (per Node) | |
| PCI-Express | * 2 (x8) PCI-E (FH/HL) w/ riser card (in x16 slots) |
| Drive Bays (per Node) | |
| Hot-swap | * 6x 3.5" SATA Hot-swap drive bays |
| Hard drive Backplane | |
| 2U Hard drive Backplane | |
| System Cooling | |
| Fans | 4x Cooling Fans |
| Power Supply | |
| 1400W high-efficiency power supply with PMBus | |
| AC Input | * 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp * 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp |
| DC Output +5V standby |
4 Amp |
| DC Output +12V |
* 100 Amp @ 100-140V * 116 Amp @ 180-240V |
| Certification | 80 PLUS Gold Certified [ Test Report ] |
| PC Health Monitoring | |
| CPU | * Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. * CPU Core 6-Phase-switching voltage regulator |
| FAN | * Total of four 4-pin PWM fans * 4x fans with tachometer monitoring * Status monitor for speed control * Status monitor for on/off control * Low noise fan speed control |
| Temperature | * Monitoring for CPU and chassis environment * CPU thermal trip support * Thermal Control for 4x Fan Connectors * PSU I2C temperature sensing logic * Thermal Monitor 2 (TM2) support * PECI |
| LED | * Power Fail / Overheat LED * Suspend-state Indicator LED * UID LED |
| Other Features | SDDC Support |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | * Operating Temperature: 10°to 35°C (50°to 95°F) * Non-operating Temperature: -40°to 70°C (-40°to 158°F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5 to 95% (non-condensing) |
|
Parts List |
|||
| Parts List - (Items Included) | |||
| Part Number | Qty | Description | |
| Motherboard / Chassis | MBD-X8DTT-HIBQF+ | 2 | Super X8DTT-HIBQF+ Motherboard |
| CSE-827HD-R1400B | 1 | 2U Black Chassis | |
| Air Shroud | MCP-310-82706-0B | 2 | Mylar air shroud for SC827, X8 DP (hot-swap) |
| Backplane | BPN-SAS-827HD | 1 | Sup 6x3.5ö SATA hdd; hot swap |
| Backplane | BPN-827ADP-X8-H+ | 2 | BPN-SASADPûSAS827-X8DTT-H+;no cable req |
| CD | CDR-X8 | 1 | For X8 series |
| Riser Card | RSC-R2UT-2E8R-O-P | 2 | RSC-R2UT-2E8R-O-P |
| Heatsink / Retention | SNK-P0038PS | 4 | 2U+ PASSIVE CPU HS FOR INTEL 2U TWIN SERVERS |
| Power Supply | PWS-1K41P-1R | 2 | 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3" |
| Fan 1 | FAN-0111L4 | 4 | 80X38MM 9.5K RPM 4-PIN PWM FAN FOR SC827 |
| Drive Tray(s) | MCP-220-00075-0B | 12 | Black hot-swap 3.5" drive tray w/ hollow-panned dummy |
| Mounting Rails | MCP-290-00053-0N | 1 | Rail set, quick/quick, default for 2,3U 17.2"W |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
