| System |
Form Factor |
1U Rackmount Frame w/ 2x 1U Blades |
| Chassis Model |
YR190 |
| Dimension (D x W x H) |
28.74" x 17.32" x 1.72" (730 x 440 x 43.6mm) |
| Blade Dimension (D x W x H) |
28.74" x 8.46" x 1.61" (730 x 214.8 x 40.8mm) |
| Motherboard |
S7018GM3NR |
| Board Dimension |
6.3"x16.4" (160x416.6mm), per blade |
| Gross Weight |
18 kg |
| Feature |
Two nodes in one chassis |
| Front Panel (per blade) |
Buttons |
(1) RST / (1) PWR / (1) ID |
| LEDs |
(1) PWR / (1) BMC / (2) LAN / (1) HDD |
| I/O Ports |
(2) USB ports |
| External Drive Bay (per blade) |
Type / Q'ty |
2.5" Hot-Swap / (4) |
| Supported HDD Interface |
SATA-II 3.0Gb/s |
| System Cooling Configuration (per blade) |
FAN |
(3) 4cm fans |
| Power Supply (per blade) |
Type |
ERP1U |
| Input Range |
Full-range AC(100-240V) |
| Frequency |
47 - 63 Hertz |
| Output Watts |
450 Watts |
| Efficiency |
PFC / 80-plus Silver |
| Serviceability |
Hot-swap |
| Processor (per blade) |
Supported CPU Series |
Intel Xeon Processor 5500/ 5600 Series |
| Socket Type / Q'ty |
LGA1366 / (2) |
| Thermal Design Power (TDP) wattage |
Max up to 95W |
| System Bus |
Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect (QPI) support |
| Chipset (per blade) |
MCH / ICH |
Intel 5500 / ICH10R |
| Memory (per blade) |
Supported DIMM Qty |
(6)+(6) DIMM slots |
| DIMM Type / Speed |
DDR3/ DDR3L 800/1066/1333* RDIMM/UDIMM / * limit 1 per channel for 1333MHz speed |
| Capacity |
Up to 96GB RDIMM / 48GB UDIMM |
| Memory channel |
3 Channels per CPU |
| Memory voltage |
1.5V |
| Expansion Slots (per blade) |
PCI-E |
(1) PCI-E Low-Profile Gen.2 x16 slot |
| Pre-install TYAN Riser Card |
M7018-R16-1L, 1U PCI-E x16 riser card (right) |
| Max. HBA Dimension (H x L) |
(1) 68.90mm x 167.65mm (HH/HL) |
| LAN (per blade) |
Port Q'ty |
Total (3) ports, (1) dedicated for IPMI |
| Controller |
Intel 82576EB / Intel 82574L |
| Storage (per blade) |
SATA |
Connector |
(4) SATA |
| Controller |
Intel ICH10R |
| Speed |
3.0 Gb/s |
| RAID |
RAID 0/1/10/5 (Intel Matrix RAID) |
| Graphic (per blade) |
Connector type |
D-Sub 15-pin |
| Resolution |
1600x1200@60Hz |
| Chipset |
Aspeed AST2050 |
| I/O ports (per blade) |
USB |
(5) ports (2 at front, 2 at rear, 1 Type A onboard) |
| COM |
(1) DB-9 COM port |
| VGA |
(1) D-Sub 15-pin port |
| RJ-45 |
Total (3) ports, (1) dedicated for IPMI |
| System Monitoring (per blade) |
Chipset |
Winbond W83793G |
| Temperature |
Monitors temperature for CPU & system environment |
| LED |
Fan fail LED indicator / Over temperature warning indicator |
| Others |
Chassis intrusion detection / Watchdog timer support |
| Server Management (per blade) |
Onboard Chipset |
Onboard Aspeed AST2050 |
| AST2050 IPMI Feature |
IPMI 2.0 compliant baseboard management controller (BMC) / USB 2.0 virtual hub / BIOS update |
| AST2050 iKVM Feature |
24-bit high quality video compression / Dual 10/100 Mb/s MAC interfaces |
| BIOS (per blade) |
Brand / ROM size |
AMI / 4MB |
| Feature |
Multiple boot options / Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
| BIOS |
Brand / ROM size |
1MB |
| Operating System |
OS supported list |
Coming soon |
| Regulation |
FCC (DoC) |
Class A |
| CE (DoC) |
Yes |
| Operating Environment |
Operating Temp. |
10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. |
- 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity |
90%, non-condensing at 35° C |
| RoHS |
RoHS 6/6 Complaint |
Yes |
| Package Contains |
Barebone |
(1) YR190B7018 Barebone |
| Manual |
(1) MB User's manual + (1) BB User's manual |
| Installation CD |
(1) TYAN installation CD |
| Heatsink / Cooler |
(4) LGA1366 CPU heatsinks |
| Rail kit |
(1) sliding rail kit for YR190 |
| Cable |
Power Cord |
(2) CCBL-0310, US type power cord / (2) CCBL-0300, EU type power cord |
Newsletter
Giỏ hàng
