Key Features
1. Form Factor : 4U Rackmount
2. Chassis Model : FT48
3. Motherboard :
S7025WAGM2NR-B
4. Board Dimension : EEB, 12"x13" (305x330mm)
5. Internal Drive Bay : 3.5" Hot-Swap / (4) / (3) 5.25" device bays, SAS 3.0Gb/s / SATA-II 3.0Gb/s
6. Supported CPU Series : Intel Xeon Processor 5500/ 5600 Series, LGA1366 / (2)
7. Memory : (4)+(4) DIMM slots, DDR3/DDR3L 800/1066/1333* RDIMM/UDIMM, Up to 64GB RDIMM/ 32GB UDIMM, 3 Channels per CPU
8. Expansion Slots : (4) PCI-E Gen.2 x16 slots / (1) PCI-E Gen.2 x8 slot (w/ x4 link) / (1) PCI-E Gen.2 x4 slot
9. Power Supply :1,300W (2 x 650W)
Specifications
| System |
Form Factor |
4U Rackmount |
| Chassis Model |
FT48 |
| Dimension (D x W x H) |
27.5" x 16.8" x 6.9" (700 x 427 x 176mm) |
| Motherboard |
S7025WAGM2NR-B |
| Board Dimension |
EEB, 12"x13" (305x330mm) |
| Front Panel |
Buttons |
(1) PWR / (1) RST / (1) ID |
| LEDs |
(1) PWR / (1) HDD / (2) LAN / (1) ID / (1) Warning |
| I/O Ports |
(2) USB ports |
| External Drive Bay |
Type / Q'ty |
3.5" Hot-Swap / (4) / (3) 5.25" device bays |
| Supported HDD Interface |
SAS 3.0Gb/s / SATA-II 3.0Gb/s |
| System Cooling Configuration |
FAN |
(3) 12cm fans |
| Power Supply |
Type |
ERP1U |
| Efficiency |
PFC / 80-plus |
| Redundancy |
(2+0), the redundant unit is not included in default configuration |
| Input Range |
Full-range AC(100-240V) |
| Frequency |
47 - 63 Hertz |
| Output Watts |
1,300W (2 x 650W) |
| GPU Power Connectors |
(2) Y-shaped, 2x4-pin auxiliary 12V power cables included (for up to (4) GPUs installation) |
| Processor |
Supported CPU Series |
Intel Xeon Processor 5500/ 5600 Series |
| Socket Type / Q'ty |
LGA1366 / (2) |
| Thermal Design Power (TDP) wattage |
Max up to 95W |
| System Bus |
Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect (QPI) support |
| Chipset |
IOH / ICH |
Intel (2) 5520 / ICH10R |
| Super I/O |
Winbond W83627DHG |
| Memory |
Supported DIMM Qty |
(4)+(4) DIMM slots |
| DIMM Type / Speed |
DDR3/DDR3L 800/1066/1333* RDIMM/UDIMM |
| Capacity |
Up to 64GB RDIMM/ 32GB UDIMM |
| Memory channel |
3 Channels per CPU |
| Memory voltage |
1.5V or 1.35V |
| Expansion Slots |
PCI-E |
(4) PCI-E Gen.2 x16 slots / (1) PCI-E Gen.2 x8 slot (w/ x4 link) / (1) PCI-E Gen.2 x4 slot |
| PCI |
(1) PCI 32-bit slot |
| LAN |
Port Q'ty |
(2) |
| Controller |
Intel 82574L |
| Graphic |
Connector type |
D-Sub 15-pin |
| Resolution |
1600x1200@60Hz |
| Chipset |
Aspeed AST2050 |
| Audio |
Chipset |
Realtek ALC262 |
| Feature |
HDA 2.0 spec. complaint |
| TPM |
Chipset |
Infineon SLB9635 |
| Version |
TPM v1.2 |
| I/O Ports |
USB |
(7) USB2.0 ports (4 at rear, 2 at front, 1 type A onboard) |
| COM |
(1) DB-9 COM port |
| VGA |
(1) D-Sub 15-pin port |
| RJ-45 |
(2) ports |
| System Monitoring |
Chipset |
Winbond W83793G |
| Voltage |
Monitors voltage for CPU, memory, chipset & power supply |
| Temperature |
Monitors temperature for CPU & system environment |
| LED |
Fan fail LED indicator / Over temperature warning indicator / Fan & PSU fail LED indicator |
| Others |
Watchdog timer support |
| Server Management |
Onboard Chipset |
Onboard Aspeed AST2050 |
| AST2050 IPMI Feature |
IPMI 2.0 compliant baseboard management controller (BMC) / BIOS update |
| AST2050 iKVM Feature |
24-bit high quality video compression / Dual 10/100 Mb/s MAC interfaces |
| BIOS |
Brand / ROM size |
AMI / 4MB |
| Feature |
Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot / ACPI 2.0 power management /Power on mode after power recovery / User-configurable H/W monitoring / Auto-configurable of hard disk types |
| Operating System |
OS supported list |
Please refer to our OS supported list. |
| Regulation |
FCC (DoC) |
Class A |
| CE (DoC) |
Yes |
| C-Tick |
Yes |
| VCCI |
Yes |
| Operating Environment |
Operating Temp. |
10° C ~ 35° C (50° F~ 95° F) |
| Non-operating Temp. |
- 40° C ~ 70° C (-40° F ~ 158° F) |
| In/Non-operating Humidity |
90%, non-condensing at 35° C |
| RoHS |
RoHS 6/6 Complaint |
Yes |
Newsletter
Giỏ hàng
