NewsletterLIÊN KẾT WEBSITE
| Product SKUs | |
| MBD-X8DTU-6TF+-LR -B | X8DTU-6TF+-LR (Bulk Pack) |
| Physical Stats | |
| Form Factor | * Proprietary |
| Dimensions | * 12.8" x 16.5" (32.5cm x 41.9cm) |
| Processor/Cache | |
| CPU | * Dual 1366-pin LGA Sockets * Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: o Intel® Xeon® Processor 5600 Series (Westmere) o Intel® Xeon® Processor 5500 Series (Nehalem-EP) |
| QPI | * up to 6.4 GT/s |
| System Memory | |
| Memory Capacity | * 18x 240-pin DIMM sockets * Supports up to 384GB 1066MHz ECC LRDIMM ECC * Supports up to 192GB 1333 / 1066 / 800MHz DDR3 ECC Registered DIMM * Supports up to 48GB 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered DIMM * Memory Mirroring supported |
| Memory Type | * 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated LRDIMMs |
| DIMM Sizes | * 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Memory Voltage | * 1.5 V / 1.35V |
| Error Detection | * Corrects single-bit errors * Detects double-bit errors (using ECC memory) * Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices | |
| Chipset | * Intel® 5520 (Tylersburg) chipset * ICH10R + IOH-36D |
| SAS | * LSI 6Gbps SAS 2108 w/ Hardware RAID support * RAID 0, 1, 5, 6, 10, 50, 60 support * BBU (battery backup) extension kit (optional) * Onboard 512MB cache |
| SATA | * Intel ICH10R SATA 3.0Gbps Controller * RAID 0, 1, 5, 10 support (Windows) * RAID 0, 1, 10 support (Linux) |
| IPMI | * Support for Intelligent Platform Management Interface v.2.0 * IPMI 2.0 with virtual media over LAN and KVM-over-LAN support * Winbond® WPCM450 BMC |
| Network Controllers | * Intel® 82599ES Dual-Port 10 Gigabit Ethernet Controller with 2 SFP+ interfaces * Intel® 82576 Dual-Port Gigabit Ethernet Controller * Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output * Intel® I/OAT 3 support for fast, scaleable, and reliable networking * VMDq support for better performance of virtualization * 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | * Matrox G200eW |
| Super I/O | * Winbond 83827HF chip |
| Input / Output | |
| SAS | * 8x 6Gbps SAS / SATA ports with 2 I-PASS connectors |
| Serial ATA | * Six Serial ATA ports * Six SATA hard drives supported |
| LAN | * 2x RJ45 LAN ports * 2x SFP+ LAN port * 1x RJ45 Dedicated IPMI LAN port |
| USB | * 2x USB rear ports * 1x USB on-board * 3x USB internal headers * Total 6 USB 2.0 Compliant |
| VGA | * 1x VGA Port |
| Keyboard / Mouse | * PS/2 keyboard and mouse ports |
| Serial Port / Header | * 1 Fast UART 16550 serial port * 1 Fast UART 16550 serial header |
| Chassis ( Optimized for X8DTU-6TF+-LR ) | |
| 1U Chassis | CSE-119TQ-R700UB CSE-819TQ-R700UB |
| 2U Chassis | CSE-219A-R920UB CSE-829TQ-R920UB |
| Important Chassis Notes | To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details. |
| Expansion Slots | |
| PCI-Express / PCI-X / UIO | Left Side 1 (x16) PCI-E 2.0 by riser card Right Side 1 (x4) PCI-E 2.0 by riser card For 2U configuration, Please go to UIO Riser Cards page |
| System BIOS | |
| BIOS Type | * 32Mb SPI Flash EEPROM with AMI® BIOS |
| BIOS Features | * Plug and Play (PnP) * PCI 2.2 * ACPI up to 3.0 * USB Keyboard support |
| Management | |
| Software | * IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support * SuperDoctor® III |
| Power Configurations | * ACPI / ACPM Power Management |
| PC Health Monitoring | |
| CPU | * Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. * 6-Phase-switching voltage regulator |
| FAN | * Total of eight fan headers supporting up to 8 fans * Eight 4-pin fan headers * 8x fans with tachometer status monitoring * Support 3-pin fans (w/o speed control) * Low noise fan speed control (4-pin fan only) |
| Temperature | * Monitoring for CPU and chassis environment * Thermal Control for 8x fan connectors * PECI |
| Other Features | * Chassis intrusion detection * Chassis intrusion header |
| Operating Environment / Compliance | |
| RoHS |  RoHS Compliant 6/6, Pb Free |
| Environmental Spec. | * Operating Temperature: 10° to 35° C (50° to 95°F) * Non-operating Temperature: -40° to 70° C (-40° to 158° F) * Operating Relative Humidity: 8% to 90% (non-condensing) * Non-operating Relative Humidity: 5 to 95% (non-condensing) |
| OS Compatibility | |
| • Please see our OS Compatibility Chart | |
|
Parts List |
|||
| Parts List (Bulk Pack) | |||
| Part Number | Qty | Description | |
| X8DTU-6TF+-LR | MBD-X8DTU-6TF+-LR -O | 1 | X8DTU-6TF+-LR Motherboard |
Quảng cáo
Hỗ trợ khách hàngSản phẩm bán chạy
LIÊN KẾT WEBSITE
Giỏ hàng
