Đặt hàng nhanh

Mainboard Supermicro MBD-X11DPL-i

Nhà sản xuất: Supermicro
Mã sản phẩm/Part No. TM3227 / MBD-X11DPL-I-O
Tình trạng: Liên hệ đặt hàng

12.330.000 VNĐ

Tư vấn mua hàng So sánh

Thông tin sản phẩm Mainboard Supermicro MBD-X11DPL-i

Key Features
1. Intel® Xeon® Processor Scalable Family., Dual Socket P (LGA 3647) supported, CPU TDP support Up to 140W, 2 UPI up to 10.4 GT/s
2. Intel® C621
3. Up to 512GB Registered ECC RDIMM and DDR4-2666MHz, Up to 1TB Registered ECC LRDIMM, in 8 DIMM slots
4. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8 slot)
M.2 Interface: PCIe 3.0 x4
M.2 Form Factor: 2260, 2280
5. 1 VGA port(s)
6. Intel® C621 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
7. Dual LAN with Lewisburg Marvell 88E1512 PHY

Specifications

Product SKUs
MBD-X11DPL-i	X11DPL-i
Physical Stats
Form Factor	ATX
Dimensions	12.076" x 10.15" (30.67cm x 25.78cm)
Processor/Cache
CPU	Intel® Xeon® Processor Scalable Family. Dual Socket P (LGA 3647) supported, CPU TDP support Up to 140W, 2 UPI up to 10.4 GT/s
System Memory
Memory Capacity	Up to 512GB Registered ECC RDIMM and DDR4-2666MHz, Up to 1TB Registered ECC LRDIMM, in 8 DIMM slots
Memory Type	2666/2400/2133MHz ECC DDR4 RDIMM, LRDIMM
DIMM Sizes	RDIMM: 64GB LRDIMM: 128GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors
On-Board Devices
Chipset	Intel® C621 chipset
SATA	Intel® C621 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI	ASPEED AST2500
Network Controllers	Dual LAN with Lewisburg Marvell 88E1512 PHY
Graphics	Aspeed AST2500 BMC
Input / Output
USB	4 USB 2.0 ports (2 rear + 2 via header(s) 3 USB 3.0 ports (2 via header(s) + 1 Type A)
VideoOutput	1 VGA port(s)
Serial Port / Header	1 COM Port (1 header(s)
TPM	1 TPM Header
Expansion Slots
PCI-Express	2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8 slot)
M.2	Interface: PCIe 3.0 x4 Form Factor: 2260, 2280
System BIOS
BIOS Type	AMI UEFI
Management
Software	Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SPM, SSM, SUM, SuperDoctor® 5, Watchdog
Power Configurations	ACPI Power Management
PC Health Monitoring
Voltage	+12V, +3.3V, +5V, +5V standby, 3.3V standby, 8 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility
FAN	8x 4-pin fan headers (up to 8 fans), Overheat LED indication, PWM fan speed control
Temperature	CPU thermal trip support PECI
LED	CPU / System Overheat LED UID/Remote UID
Other Features	ACPI power management, ATX Power connector, Chassis intrusion detection, Chassis intrusion header, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Node Manager Support, SDDC, UID, WOL

Note: For optimized or compatible chassis, additional parts may be repuired, please check with Supermicro sales rep